GFIVE President G6C Version 4.2.2 Flash File Firmware

GFIVE President G6C Version 4.2.2 Flash File Firmware/Stock ROM GFIVE President G6C

Initial Steps to Install Firmware on GFIVE President G6C

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash GFIVE President G6C

  1. First, you need to download and install SP flash tool and USB drivers for GFIVE President
  2. Download and install MTK USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process,
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone GFIVE President G6C
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes to fully installed firmware on your Phone GFIVE President G6C So, keep patience and wait.

See detailed Instruction MT flashing SP tool with images

Might Also Like

GFIVE President Xhero 3 SC7731 Firmware Flash File

Gfive President Classic 7 MT6582 Firmware Flash File

Download Link

Leave a Comment