Huawei Clone S1 MT6582 Firmware Flash File

MT6582__S1__S1__hct82_cwet_kk__4.4.2__R04

Preloader_hct82_cwet_kk

Initial Steps to Install Firmware on Huawei Clone S1

First, you need to download and install SP flash tool and USB drivers for your
Download and install MTK android USB driver Huawei Clone S1
Then download Firmware file/Flash file/Rom for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.