Huawei Clone ZLR M7 MT6582 Firmware Flash File

Initial Steps to Install Firmware on Huawei Clone ZLR M7   

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Huawei Clone ZLR M7 

1. First, you need to download and install SP flash tool
2. Download and install MTK  Android USB drivers
3. Then download Firmware file/Flash file/ROM for your phone
4. Your phone must have 50 % charging before this process,
5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
6. Now open SP flash tool.exe
7. When SP flash tool open, go to download button in SP flash tool
8. In download tab, click on scatter load button
9. After locating the scatter tab, click on the download button
10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
11. Now flashing is completed, a green ring will appear in SP flash tool
12. Close SP flash tool on your computer and unplug phone
13. Power on the phone and enjoy
14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing SP tool with images

Might Also Like

:

Huawei G730-U30 Flash File Firmware

Huawei Ascend Y360-U61 Firmware Flash File