iPhone 5S Clone Firmware Flash File/Stock ROM iPhone 5S Clone
Initial Steps to Install Firmware on iPhone 5S Clone
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash iPhone 5S Clone
- Download install SP flash tool, USB drivers, and firmware for your iPhone 5S Clone
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Xiaomi Mi Max Android 6.0 Firmware Flash File
Rivo Rhythm RX65 Android 4.4.2 Firmware Flash File
File Name: iPhone_5S_MT6582_4.2.2.zip (mtk)
File Size: 395 MB
How to Flash: Follow Tutorial
File Name: iPhone_5S_MT6572_White_Gold_15062014.zip
File Size: 238 MB
How to Flash: Follow Tutorial
File Name: iPhone_5S_Clone_T910_SC6820_06012014.zip (spreadtrum)
File Size: 151 MB
How to Flash: Follow Tutorial