iPhone 6 Clone Firmware Flash File/Stock ROM iPhone 6 Clone
Initial Steps to Install Firmware on iPhone 6 Clone
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash iPhone 6 Clone
- Download install SP flash tool, USB drivers, and firmware for your iPhone 6 Clone
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Nokia 8 TA-1004 Android 7.1.1 Firmware Flash File
Rivo Rhythm RX65 Android 4.4.2 Firmware Flash File
File Name: iPhone_6_MT6572_iOS8_ALPS.JB3.MP.V1.zip
File Size: 344 MB
Android Version: 4.2.2
How to Flash: Follow Tutorial
File Name: iPhone_6_Clone_MT6571_MG492CHA_17112015.zip
File Size: 267 MB
Android Version: 4.2.2
How to Flash: Follow Tutorial