iPhone 6 Plus Clone Firmware Flash File/Stock ROM iPhone 6 Plus Clone
Initial Steps to Install Firmware on iPhone 6 Plus Clone
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash iPhone 6 Plus Clone
- Download install SP flash tool, USB drivers, and firmware for your iPhone 6 Plus Clone
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
iPhone7 Plus Clone Blank LCD Fix MT6580 Firmware Flash File
Nokia 6 TA-1025 Android 7.1.1 Firmware Flash File
File Name: iPhone_6_Plus_Clone_MT6572_4.2.2_ALPS.JB3.MP.V1.38.zip
File Size: 273 MB
How to Flash: Follow Tutorial
File Name: iPhone_6_Plus_Clone_MT6582_4.4_ALPS.JB5.MP.V1.13.zip
File Size: 428 MB
How to Flash: Follow Tutorial
File Name: iPhone_6_Plus_MT6571_26032015_4.2.2.zip
File Size: 232 MB
How to Flash: Follow Tutorial