iPhone7 Plus Clone Blank LCD Fix MT6580 Firmware Flash File

iPhone7 Plus Clone Blank LCD Fix MT6580 Firmware Flash File/Stock ROM iPhone7 Plus Clone

Initial Steps to Install Firmware on iPhone7 Plus Clone 

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash iPhone7 Plus Clone 

  1. First, you need to download and install SP flash tool and USB drivers for your iPhone7 Plus Clone
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

password- iphone.7.plus.lcd.fix

Might Also Like

:

Sky Vega IM-A910S Stock Binx Rom Flash File Firmware

Motorola Moto E XT1527 Android 5.0.2 Firmware Flash File

Download Link

Leave a Comment