Lg G3 MT6572 flash file | firmware

Lg G3 MT6572 flash file firmware/Stock ROM Lg G3 clone

Preloader_magcomm72_cwet_kk.bin (99.3 kB)

MT6572__lge__LG-D855__g3__4.4.2__ALPS.KK1.MP7.V1.7

1. Initial Steps to Install Firmware on Lg G3 clone

   1. Download and install MTK  android USB drivers
   2. Download And Install SP Flash Tool

   How To Flash Lg G3 clone

   1. First, you need to download and install SP flash tool and USB drivers for your Lg G3 clone
   2. Download and install MTK  android USB drivers Lg G3 clone
   3. Then download Firmware file/Flash file/Rom for your phone
   4. Your phone must have 50 % charging before this process
   5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
   6. Now open SP flash tool.exe
   7. When SP flash tool open, go to download button in SP flash tool
   8. In download tab, click on scatter load button
   9. After locating the scatter tab, click on the download button
   10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
   11. Now flashing is completed, a green ring will appear in SP flash tool
   12. Close SP flash tool on your computer and unplug phone
   13. Power on the phone and enjoy
   14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

   See detailed Instruction MT flashing sp tool with images