OnePlus 3 Firmware Flash File

OnePlus 3 Firmware Flash File/Stock ROM OnePlus 3

Early steps to Install Stock ROM on OnePlus 3

  1. Download and Install Minimal ADB and Fastboot Tool
  2. Download Latest OnePlus USB Drivers 

How To Flash OnePlus 3

  1. Download and install USB driver and firmware for your
  2. Enable “Developer Option” and “USB Debugging” on your device
  3. you have to enable the developer option.To Do So Go to Settings > About Phone > Build Number then tap on press build number 7 times to enable the developer option
  4. return to the setting’s main menu and scroll down to the bottom, there should be Developer option available above System Update.Now go to Developer option then scroll down to USB debugging and enable that.
  5. switch off your phone and reboot into recovery mode.
  6. Once your phone is switched off, press and hold the Power and Volume down buttons at the same time.
  7. Continue holding these two buttons till the OnePlus/Android splash screen that appears.
  8. Connect Your Phone to your PC using provided USB Cable
  9. select Install FROM USB in your device’s recovery menu.Now execute the following codes
  10. Install OxygenOS executing the following command.
  11. Wait until the installation process completes.Done!!!
  12. Your OnePlus device should boot into latest OxygenOs firmware

See detailed Instruction Installing using ADB Methode

Might Also Like

Xiaomi Redmi Note 2 Android 5.0 Firmware Flash File

Xiaomi Mi Max Android 6.0 Firmware Flash File

File Name:
File Size: 1 GB
Download Link

File Name:
File Size: 1 GB
Download Link

Leave a Comment