Rivo Phantom PZ8 Firmware Flash File/Stock ROM Rivo Phantom PZ8
Prerequisites for Installing ROM on Rivo Phantom PZ8
- Download and install QPST 2.7.422 with QFIL
- Download and install Qualcomm USB Drivers.
How To Flash ROM Rivo Phantom PZ8
- Download USB driver and flash file for your Rivo Phantom PZ8
- Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
- Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
- There should be the device called in device management:
- Qualcomm HS-USB QDLoader 9008 (COMXX)
- In any other case, you have to install drivers manually.
- Run QFIL.
- Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
- Load XML in Download Section:
- First select RawProgram File: rawprogram0.xml
- then Select Patch File: patch0.xml
- Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
- Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.
See detailed Instruction Qualcomm flashing QPST tool with images
Might Also Like
Rivo Rhythm RX90 Android 5.1 Firmware Flash File
Rivo J05 Android 6.0 Firmware Flash File
File Name: Rivo_Phantom_PZ8_V4_QFIL.zip
File Size: 653 MB
How to Flash: Follow Tutorial