Samsung G935 S7 Clone MT6580 Firmware Flash File

Samsung G935 S7 Clone MT6580 Firmware Flash File

MT6580__samsung__SM-G935F__nobleltehk__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P37

Preloader_hct6580_weg_a_l

Initial Steps to Install Firmware on Samsung G935 S7 Clone  

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Samsung G935 S7 Clone

  1. First, you need to download and install SP flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process,
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing SP tool with images

Might Also Like

Samsung Galaxy S7 Edge G935F Clone MT6580 Firmware Flash File

Leave a Comment