Samsung Note 3 SM-N900 MT6589 V4.4.2 Firmware Flash File
Preloader_mbk72_wet_jb3 (97.1 KB)
Initial Steps to Install Firmware on Samsung Note 3 SM-N900
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Samsung Note 3 SM-N900
- First, you need to download and install SP flash tool
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
- See detailed Instruction MT flashing SP tool with images
really is helpfull page and web
ITS AMAZING WEBSITE
IT AMAZING WEBITE