Tecno Camon 18T CH6H Firmware Flash File/Dead Boot Fix

1. Prepare your device: Ensure that your device is fully charged and backed up before proceeding.
2. Install SP Flash Tool: Download and install the latest version of SP Flash Tool on your computer.
3. Download firmware: Obtain the firmware that you wish to flash to your device. It is important to download the correct firmware for your device, as using the wrong firmware can cause serious problems.
4. Extract firmware: Extract the firmware file to a directory on your computer.
5. Open SP Flash Tool: Launch SP Flash Tool and select “Download” mode.
6. Connect device: Connect your device to your computer using a USB cable. Make sure that your device is in “Download” mode.
7. Load firmware: Click on the “Scatter-loading” button in SP Flash Tool and select the scatter file from the extracted firmware directory.
8. Begin flashing: Click the “Download” button in SP Flash Tool to begin the flashing process. The tool will indicate when the process is complete.
9. Disconnect device: Once the flashing process is complete, disconnect your device from the computer and restart it.

It is important to follow these steps carefully, as improperly flashing a device can cause serious problems or render it inoperable. Additionally, be sure to only use firmware that is intended for your specific device and from a reliable source.