Wiko Iggy MT6572 Android4.4.2 Firmware Flash File/Stock ROM Wiko Iggy
Initial Steps to Install Firmware on Wiko Iggy
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Wiko Iggy
- First, you need to download and install SP flash tool and usb driver for Wiko Iggy
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Might Also Like
:
Wiko Lenny3 MT6580 Firmware Flash File
LG Optimus G Pro E988 Kdz Firmware Flash File