Xiaomi Redmi 4A Firmware MSM8937 Firmware Flash File

Xiaomi Redmi 4A Firmware MSM8937 Firmware Flash File/Stock ROM Xiaomi Redmi 4A F

Prerequisites for Installing Rom on Xiaomi Redmi 4A

Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers for your Xiaomi Redmi 4A F.
Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode your Xiaomi.
There should be the device called in device management:
Qualcomm HS-USB QDLoader 9008 (COMXX)
In any other case, you have to install drivers manually.
Run QFIL.
Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
Load XML in Download Section:
First select RawProgram File: rawprogram0.xml
then Select Patch File: patch0.xml
Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.