Xiaomi Redmi Note 3G Firmware Flash File

Xiaomi Redmi Note 3G Firmware Flash File/Stock ROM Xiaomi Redmi Note 3G

Early steps to Install Stock ROM on Xiaomi Redmi Note 3G

  1.  Download and Install Xiaomi Mi Flash Tool
  2. Download and install USB Driver for your MI device

How To Flash Xiaomi Redmi Note 3G

  1. Download Mi flash tool USB driver, and firmware for your Xiaomi Redmi Note 3G
  2. Open the Setup File to install Xiaomi Mi Flash Tool on your computer.
  3. Turn Off your Xiaomi Device.
  4. You need to boot your Xiaomi Device into the Download Mode (fastboot mode). To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.
  5. you have booted into the Download Mode, you will be able to see the following screen on your device
  6. Connect your Xiaomi Device to the Computer using the USB cable.
  7. Click on the Select Button and locate the Firmware Folder.
  8. Click on Flash Button to begin the Flashing Process
  9. Once flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.
  10. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  11. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Xiaomi Mi Flash Tool with images

Might Also Like

Xiaomi Mi 6 Android 7.1.1 Stock ROM Firmware

Xiaomi Mi 5 Android 6.0 Firmware Flash File

File Name: Xiaomi_Redmi_Note_3G_MT6592_JHDCNBL42.0_2014018_China_4.2.2.zip
File Size: 587 MB
How to Flash: Follow Tutorial

Leave a Comment