• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Mobiles Firmware

Android Roms and Flash tools

  • Firmware ROMs
  • Flashing Tools
  • Tutorials
  • Mobile Reviews
You are here: Home / Flashing Tools / All MTK Smart phone Flashing method with SP Flash Tool
All MTK Smart phone

All MTK Smart phone Flashing method with SP Flash Tool

July 15, 2020 By Afzaal Ahmad 4 Comments


Share
Tweet
Pin
Buffer
24 Shares

All MTK Mobiles Flashing method with SP Flash Tool

Initial Steps to Install Firmware on All MTK Smartphone

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash All MTK Smartphone

Step 1: Download and install Android USB Drivers on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:

Step 5: Now Open Flash_tool.exe.

Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the Scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed

Follow video Tutorial



Filed Under: Flashing Tools

Reader Interactions

Comments

  1. Shivaraj Shah says

    March 3, 2017 at 3:19 pm

    I have followed all the steps given.and process completed successfully but my mobile is not working.system get hanged in boot screen.

    Reply
  2. d b says

    March 5, 2017 at 1:21 pm

    i have a samsung c7 clone – i followed instructions to flash it – terminated with the download ok msg but unfortunately now the device is dead – absolutely no vital sign – none even if a connect it to the charger…. what i can do now ? the device is new i was flashing it because the OS that was on it was pre loaded with a trojan….

    Reply
  3. Nasir Khan says

    May 2, 2017 at 6:17 am

    Can I renew my software version by my js1 mobile??

    Reply
  4. Qasim says

    July 26, 2017 at 11:25 am

    Thanx man it worked….

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

advertisement

Categories

Copyright © 2020. Mobiles Firmware All Rights Reserved
Privacy Policy | Terms of Use | About | Contact |