Qmobile A290 MT6572 All Version firmware flash file/Stock ROM Qmobile A290
Initial Steps to Install Firmware on Qmobile A290
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Qmobile A290
- First, you need to download and install SP flash tool and usb driver for your Qmobile A290
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Might Also Like
:
Qmobile A20 MT6589 firmware | flash file
Other Version Files
MT6572_QMobile A290_4.4.2__ALPS.KK1.MP7.V1
MT6572_QMobile_A290 3G_4.4.2_ALPS.KK1.MP7.V1
MT6572_QMobile_A290_3G_4.4.2_ALPS.KK1.MP7.V1 Bin