Qmobile S1 Pro Mt6580 Firmware Flash File
Preloader_d5170_qmobile_s7
Initial Steps to Install Firmware on Qmobile S1 Pro
- Download and install MTK Android USB drivers
- Download And Install SP Flash Tool
How To Flash Qmobile S1 Pro
- First, you need to download and install sp flash tool and USB driver for your Qmobile S1 Pro
- Download and install MTK Android USB drivers Qmobile S1 Pro
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SPflash tool.exe
- When sp flash tool open, go to download button in sp flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in sp flash tool
- Close sp flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
See detailed Instruction MT flashing sp tool with images
Might Also Like
:
Q Mobile S1 Lite SC7731 Android 6.0 Firmware Flash File
QMobile S5 MT6582 firmware | flash file