Samsung Galaxy Grand Prime SM-G5308W MT6572 Firmware Flash File
Preloader_rtech72_wet_jb3.bin (97.7 kB)
MT6572_Samsung_SM-G5308W_4.4.4_ALPS.JB3.MP.V1
Initial Steps to Install Firmware on Samsung Galaxy Grand Prime SM-G5308W
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Samsung Galaxy Grand Prime SM-G5308W
- First, you need to download and install SP flash tool
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Might Also Like
:
Samsung Galaxy IV I950X MT6572 Firmware Flash File
Samsung Galaxy J7 SM-J700H MT6572 Stock Firmware Flash File