Wiko View Prime Firmware Flash File/Stock ROM Wiko View Prime
Prerequisites for Installing ROM on Wiko View Prime
- Download and install QPST 2.7.422 with QFIL
- Download and install Qualcomm USB Drivers.
How To Flash ROM Wiko View Prime
- Download USB driver and flash file for your Wiko View Prime
- Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
- Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
- There should be the device called in device management:
- Qualcomm HS-USB QDLoader 9008 (COMXX)
- In any other case, you have to install drivers manually.
- Run QFIL.
- Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
- Load XML in Download Section:
- First select RawProgram File: rawprogram0.xml
- then Select Patch File: patch0.xml
- Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
- Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.
See detailed Instruction Qualcomm flashing QPST tool with imges
Follow Video Tutorial
Might Also Like
Rivo Phantom PZ1 Firmware Flash File
iBall Slide 6309R Firmware Flash File
File Name: Wiko_View_Prime_28092017_QFIL.zip
File Size: 2 GB
Download Link