Acer Liquid E1 Firmware Flash File

Acer Liquid E1 Firmware Flash File/Stock ROM Acer Liquid E1

Initial Steps to Install Firmware on Acer Liquid E1

1. Download and install MTK  android USB drivers
2. Download And Install SP Flash Tool

How To Flash Acer Liquid E1

1. Download install SP flash tool, USB drivers, and firmware for your Acer Liquid E1
2. Download and install MTK  android USB drivers
3. Then download Firmware file/Flash file/Rom for your phone
4. Your phone must have 50 % charging before this process
5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
6. Now open SP flash tool.exe
7. When SP flash tool open, go to download button in SP flash tool
8. In download tab, click on scatter load button
9. After locating the scatter tab, click on the download button
10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
11. Now flashing is completed, a green ring will appear in SP flash tool
12. Close SP flash tool on your computer and unplug the phone
13. Power on the phone and enjoy
14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

Might Also Like

Tecno K9 Android 7.0 Firmware Flash File

Oale X2 MT6580 Firmware Flash File

File Name: Acer_Liquid E1_E1_05282010_4.1.1_OTA.zip
File Size: 391 MB
How to Flash: Copy the update.zip file to the phone SD and flash it through the stock recovery mode.
Download Link