iBall Slide i9018 Firmware Flash File

iBall Slide i9018 Firmware Flash File/Stock ROM iBall Slide i9018

Initial Steps to Install Firmware on iBall Slide i9018

Download firmware for your iBall Slide i9018
Download and install Android ADB Drivers on your computer.
Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files:
LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.
You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.
Unplug all the connected Smartphone and tablets from the computer (if you have already connected), then Click on Yes button to Continue.
You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware.
It is the right time to connect your Android Smartphone or Tablets to the Computer using USB Cable. Before Connecting the Android Device, make sure its Power Off.
On the next Windows, again click on Yes Button to continue.
Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete).
Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it.
After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.