Initial Steps to Install Firmware on Intex Aqua Crystal Plus
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Intex Aqua Crystal Plus
- First, you need to download and install SP flash tool and USB drivers for your Intex Aqua Crystal Plus
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In the download tab, click on the scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug the phone
- Power on the phone and enjoy
- After the flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like:
Intex Aqua Sense 5.1 Android 5.1 Firmware Flash File
Intex Aqua Secure MT6735 Android 5.1 Firmware Flash File
File Name: Intex_Aqua_Crystal_Plus_MT6737M_V09_lndian_SER.zip
File Size: 916 MB
How to Flash: Follow Tutorial