Karbonn Titanium S11 Firmware Flash File/Stock ROM Karbonn Titanium S11
Initial Steps to Install Firmware on Karbonn Titanium S11
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Karbonn Titanium S11
- Download install SP flash tool, USB drivers, and firmware for your Karbonn Titanium S11
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Xiaomi Redmi 4X Android6.0 Firmware Flash File
Karbonn Titanium S205 2GB Android 5.1 Firmware Flash File
File Name: Karbonn_S11_V1004.zip
File Size: 327 MB
How to Flash: Follow Tutorial
File Name: Karbonn_S11_v1005.zip
File Size: 337 MB
How to Flash: Follow Tutorial