Vivo X7 Plus Firmware Flash File/Stock ROM Vivo X7 Plus
Initial Steps to Install Firmware on Vivo X7 Plus
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Vivo X7 Plus
- Download install SP flash tool, USB drivers, and firmware for your Vivo X7 Plus
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug a phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Hisense L675 Android 6.0 Firmware Flash File
Hotwav Magic Q8 Firmware Flash File
File Name: Vivo_X7_Plus_PD1603_A_1.12.1_OTA.zip
File Size: 2 GB
How to Flash: Copy update.zip file to phone SD memory and flash it from Recovery Mode.
Download Link