Wiko Freddy Android 6.0 Firmware Flash File

Wiko Freddy Android 6.0 Firmware Flash File/Stock ROM Wiko Freddy

Prerequisites for Installing ROM on Wiko Freddy

Download USB driver and flash file for your Wiko Freddy
Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
There should be the device called in device management:
Qualcomm HS-USB QDLoader 9008 (COMXX)
In any other case, you have to install drivers manually.
Run QFIL.
Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
Load XML in Download Section:
First select RawProgram File: rawprogram0.xml
then Select Patch File: patch0.xml
Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.